The AO+ is a next generation ampoule opener, which requires no user contact with the glass ampoule during and after opening – thereby virtually eliminating sharps injuries. AO+ in addition helps prevent needle stick injury with its optional needle holding tower in the safety base system which is part of the AO+ system. Each AO+ is made to suit the individual size of an ampoule to ensure a clean break and your ultimate protection.
AO+ is a two part system incorporating a safety holding/mounting base and a sealed opening chamber- the opener. The base is designed to hold the ampoule in a port safely at all times where the ampoule cannot fall over. In addition the base is designed to catch the opened neck in another port. This allows easy disposal of both the empty ampoule and neck in one simple action into a sharps container after all procedures have been completed. A needle cap holding system is an additional option that can be ordered for incorporation on the safety base. This is designed to hold the needle cap or needle vertically so it is easy to reinstall the cap or needle to prevent needle stick injury occurances.
AO+ is available in different configurations of single, double, tripple base holding capacitities and other custom designs to suit your procedural needs. AO+ can be made with a single size opener on it or dual types: like a 1 ml and 5 ml or other sizing needs. AO+ can be easily built to your specific sized ampoules within our fast custom manufacture abilities at Low cost and short turn around time of 72 hours.
Custom Orders: In order to Custom Make an AOP for your ampoule, we need: 1. As prefered. Samples of your ampoule/s sent to us. We require a minimum of 2-6 ampoules of each type shipped to our SHIPPING ADDRESS. Note: Your shipping fees will be refunded from your first order. Or 2. Accurate measurements of your ampoule/s per our instructions: MEASURING YOUR AMPOULE/S. and 3. Photos of your ampoule/s. OR 4. The manufacturer specifications of the ampoule/s.
This information or any special design needs and procedural requirement/s can be supplied to CUSTOM ORDERING.
Selection of your AO+ is easy. If you know your ampoule type and size, scroll down the page to step 1. and select your type of ampoule from our model range buttons.
If you are not sure about your ampoule and do not know what type and size it is. 2. Click one of the buttons for help identfying your ampoule. Then go back to find your type of corresponding opener or Custom orders of either AO+ or AOT.
If you cannot find your type and size of ampoule in our existing model range, we can quickly make an AO+ or AOT to suit your ampoule.
If you want a custom made AO+ opening system go to CUSTOM ORDERS and send us your information.
STEP 1: Know your size and type of ampoule, Select a button from our range.
Select from the buttons below for our existing model range of openers.
- Standard DIN type: AO+ units made to suit DIN ISO 9187 European standard ampoules from 1 – 20 ml ampoule sizes. DIN AMPOULES.
- Ergonomic DIN design: AO+ units made with an Angled ergonomic base design for full range of DIN ampoules. Designed to reduce stress injury from removing compounds from opened ampoules.
- Wheaton ampoules: AO+ units made to suit USA manufacturer Wheaton range of ampoules from 1-20 mls sizes.
- IH Ampoule Library: Our existing types of AO+ openers made for custom requests from clients from around the world. Plus varying drug, cosmetics, analytical compounds and reagents ampoules within our growing library to date.
- Staff Training ampoules & openers: AO+ openers and our range of training ampoules with distilled water contents for use in training excercises of staff in safety procedures in opening glass ampoules and using needle and syringes to avoid needle stick injury occurances.
- New custom: A greater description of our custom made openers.
AO+ DIN: 1mL (Non-Sterile)
AO+ DIN: 2mL (Non-Sterile)
AO+ DIN: 3mL (Non-Sterile)
AO+ DIN: 5mL (Non-Sterile)
AO+ DIN: 10mL (Non-Sterile)
AO+ DIN: 20mL (Non-Sterile)
AO+ DIN Ergonomic Base: 1mL (Non-Sterile)
AO+ DIN Ergonomic Base: 2mL (Non-Sterile)
AO+ DIN Ergonomic Base: 3mL (Non-Sterile)
AO+ DIN Ergonomic Base: 5mL (Non-Sterile)
AO+ DIN Ergonomic Base: 10mL (Non-Sterile)
AO+ DIN Ergonomic Base: 20mL (Non-Sterile)
AO+ Non Sterile Wheaton: 1mL
AO+ Non Sterile Wheaton: 2mL
AO+ Non Sterile Wheaton: 5mL
AO+ Non Sterile Wheaton: 10mL
AO+ Non Sterile Wheaton: 20mL
Nova Bio Medical
Full range of 2ml calibration standards. Level 1-10.
Full MOSM range of calibration standards ampoules.
Hospira/Pfizer Lidocaine Hydrochloride injectable
2ML (40mg/2mL & 20mg/2mL)
Hospira Lidocaine 5mL (50mg/5mL)
1mL Testeroviron injection / 1mL Estradiol Valerate 10mg/ml
Sanofi-Aventis: 2mL. Piportil L4:
Pipotiazine palmitate injection (100 mg/2mL)
Collection of 1ml Drug rehabilitation compounds. This opener opens all these.
Flupentixol Deconate 20mg/ml
Clopisol Depot 200mg/ml
Zuiopenthixol Deconate 200mg/ml
Clopisol Accuphase 50mg/ml
Fuphazine Deconate 100mg/ml
Chlohydrate de Naloxone 0.4mg/ml:Sandoz
Siemans Healthcare Diagnostics Inc.
2.5ML Calibration standard ampoules / 2.5 ML Complete ampoules. Level 1-3
Claris Healthcare: 4ML Norepine 1mg/ml
Fisher Scientific: 1ML Trifluroacetic acid (TFA)
Fisher Scientific: 4 ML Trifluroacetic acid (TFA)
SIGMA-Aldrich USA/Germany: Fluka Analytical
8ML Ampoule #34849 Hydranal
#34828 Hydranal 4 ML ampoule
Becton, Dickinson Company
Radicut - Edaravone injection 20 ml ampoules
This opener will open both japanese and indian ampoules from:
The Japanese drug is made by Kyorin and the indian by Lupin.
The drug general name is edaravone.
The Asian trade name is radicut.
Staff Training Ampoules & Openers
At Innovation Hub safety is our focus, so we have developed a range of safety ampoule openers to work with training glass ampoules for your use. Training staff how to use glass ampoules safely is a way to assist your staff members and to ensure their protection from sharps and needlestick injury. Our existing range gives you a cost effective way of achieving your safety training goals. Our range includes our own manufactured ampoules with contents of distilled water. Plus our range of openers for the Wallcur training ampoules. We can supply you with ampoules sized according to your needs. If you cannot find your requirements below please contact our sales office with your needs or for greater details on our training ampoules and safety openers..
Innovation Hub range of testing and training glass ampoules
Product & Packaging Customizations
Promotional Use/Custom Branding: AO+ is available for promotional use. It is larger and more costly to produce than the AO ampoule opener. It is easy to use as a promotional piece or be supplied separately in a custom branded box with instruction or other literature inside. AO+ can be custom printed with a company’s logo and other requirements can be met. Promotional use of AO+ is available on high volume purchase. Contact a sales representative using the contact form below for details.
Product Packaging Options
- Individual card type packaging: Instruction literature is supplied with each individual unit.
- Kit: The AO+can be combined in any “kit” configuration required by a client.
- Bulk: All products are available in custom bulk configurations.
- Custom packaging is available subject to our design and construction abilities.
Contact a sales representative using the contact form below for more details on product packaging options.
Product Literature: Safety sheets are supplied with all products when individually packaged. Bulk literature is available when required by the customer. English is the primary language, however can be made available in other languages per customer requirements. Literature sheets can be customized for clients needs. Contact a sales representative using the contact form below for details.
International & Distributor Orders
We welcome international customers and those interested in placing large discounted wholesale or institutional orders to contact us using the form below for a quote.